LEDNEON FLEX
|
Though neon has long been the mainstream of the outdoors linear lighting, it is
also known for its technical weaknesses, including complicated installation, fragile
glass nature, potential shock hazard, high maintenance cost and high power consumption.
However, the market for outdoor linear lighting is so vast that many manufactures
try to find a perfect substitute for neon, but they all fail to solve the above
problems. With over 2 years' advanced LED technologicalresearch and development
work, Neo-Neon has finally succeededin producing LEDNEON-FLEX to replace glass neon.
Compared with glass neon, it is easier to cut and can be bent into whatever angles
by hand, installation can be within minutes and most important, it gives no hot spot on appearance. |
|
 |
 |
| ITEM NO. | LENGTH IN ROLL | DIMENSION | LED SPACING | TOTAL NO. OF LED | TOTAL WATTS |
|---|---|---|---|---|---|
| LN-FX-10-240V |
9.1m 10.0m |
14X27.5MM | 0.5" |
720 792 |
43.2W 66W |
| LN-FX-50-240V |
48.8m 49.4m |
14X27.5MM | 0.5" | 3840 | 230.4W |
| 3888 | 324W | ||||
| LN-FX-30-120V | 30FT | 14X27.5MM | 0.5" |
720 720 |
43.2W 60W |
| LN-FX-150-120V | 150FT | 14X27.5MM | 0.5" | 3600 | 216W |
| 3600 | 300W | ||||
| LN-FX-30-24V | 30FT | 14X27.5MM | 0.5" |
720 720 |
64.8W 72W |
| ITEM NO. | NO.OF LED PER UNIT | CUTTING UNIT | WATTS PER METER OR FOOT | LED COLOR | MAX. LOADING LENGTH |
|---|---|---|---|---|---|
| LN-FX-10-240V |
120 72 |
1.52M 0.91M |
4.7W/M 6.6W/M |
R,Y,O G,B,W |
58M (With 1.6A converter) 146M (With 4A converter) |
| LN-FX-50-240V | 120 | 1.52M | 4.7W/M | R,Y,O | |
| 72 | 0.91M | 6.6W/M | G,B,W | ||
| LN-FX-30-120V |
60 36 |
2.5FT 1.5FT |
1.44W/FT 2W/FT |
R,Y,O G,B.W |
96FT (With 1.6A converter) 240FT (With 4A converter) |
| LN-FX-150-120V | 60 | 2.5FT | 1.44W/FT | R,Y,O | |
| 36 | 1.5FT | 2W/FT | G,B,W | ||
| LN-FX-30-24V |
8 6 |
1/3FT 1/4FT |
2.16W/FT 2.4W/FT |
R,Y,O G,B,W |
16FT (With 1.6A converter) 40FT (With 4A converter) |
|
Installing Mode: The LEDNEON-FLEX is a versatile and user-friendly lighting device. It can be cut, bent and easily installed on the flat surface of various materials, such as wood, plastic, steel, or wall, etc. to form all kinds of pattern according to your design. And it can be easily connected to the power supply and then perform well. 1. It is recommended to mark centerlines or draw the outline of your pattern on the surface of your desired positions. 2. Secure mounting clips along the centerlines at appropriate intervals with screws. If there are curves, it is better to secure a mounting clip on and between each curve. 3. Insert the light body into the mounting clips with the lighting parts upward. 4. Connect each part together. |
||
| LED Showroom |
| 1. Cutting mark | 2. Linear installation | 3. Curve installation | 4. 90o Installation |
 |
 |
 |
 |
|
LN-FX Must be cut only on the indicated mark |
Includes:
Channel LN-FX-CH |
Includes: 1. Mini channel LN-FX-5 2. Screw |
Includes: 1. Mini channel LN-FX-5 2. Screw |
| 5. 180o Installation | 6. Convex installation | 7. Concave installation | 8. Installation with the slot |
 |
 |
 |
 |
|
Includes: 1. Mini channel LN-FX-5 2. Screw |
Includes: Mini channel LN-FX-5 |
Includes: Mini channel LN-FX-5 |
Press LN-FX into the slot of the installation |
